ARCELI Aluminum MK3 12V Heatbed Platform 220x220x3mm PCB Hot Plate with Cable Line for Reprap 3D Printer
Description
- Our MK3 was built in a product process with an aluminum plate. The 3mm thicker aluminum heating bed with its own weight provides a better printing experience. There are many advantages over other materials.
- The new circuit guarantees a stable power supply, no matter if with 12V or 24V power supply.
- The entire board size: 214 * 214 * 3 mm, heated area 200 * 200mm, 209mm average distance between the mounting holes.
- The four corners covered with a special plastic protection. Worry-free for transport!
- Connection method (under)
Assembly method: With 12V supply voltage: One cable connects 1, another cable. 2 and 3At 24 V voltage: One cable connects 2, another cable connects 3 (1 remains).Double power supply. Operation with 12 volts or 24 volts. Thinner cables can be used when operating with 24 volts.A central mounting hole on the front for three-point mounting. This is much easier for leveling the bed than for 4-point mounting. First align and secure the side with two holes, then align the side with one hole.Large welding pads for several wires (flat cable) or an SMD connector can be installed. Pads for thermistor SMD 12061 layer of 35 μm copperFEATURE:The 12 volt resistor is between 1.0 and 1.25 ohms (115 ~ 144 watts).The 24 volt resistor is between 4.0 and 5.0 ohms (144 ~ 115 watts).110 degrees Celsius possible for 12 volts as well as for 24 voltsThe 24 volt operation at the 12 volt terminals heats the heating surface to 100 degrees in just 2 minutes (it also consumes up to 576 watts !!)Maximum nominal temperature: 180 degrees CelsiusThe flatness over the surface is approximately within + -0.2 mmMaterial: aluminumSpecial function: contact diode with highback resistance pointFunction: Darlington triodeUse: mixed diodeStructure: NPN Package content: 1 x Mk3 aluminum 3d 3d printer heated bed print bed
Common Questions
Trustpilot
3 weeks ago
2 weeks ago
