ANYCUBIC3D Printer Resin 2.0, 405nm Plant-Based Rapid Resin 2.0, Low Odor, Photopolymer Resin for LCD 3D Printing,1kg Grey

I use this for all of my miniatures that I 3d print. Good detail, each bottle has a little different perfect Cure time, so want to do a test, (I prefer Puck the Adventurers Tester). But if cure time is right and clean vat Prints turn out awesome time and time again. Smells, a little but not bad. Color is Grey but I always prime and paint my miniatures anyway. Cheaper then most price wise and looks good and couldn't tell.

New to the party. Started with washable Resin from another company, with my first print which was the two Rooks on the Mars 2 Pro. Despite the great turnout, the smell was way too much to print a second object.Once it was exposed to the air, it wouldn't die out until the next day. Even with a big open window, fan and giant-a$$ air purifier. I stopped using it and purchased a few of the Anycubic EC resins. Started with transparent green, and was shocked in not only the great results, but the odor was even lower than I expected. You have to stick your face next an exposed vat to smell anything.Opened up the pink the next day, and again, great results, though I have to say, the odor on this one was a bit stronger, but still nothing like that water washable. Finally, I started using the EC White tonight, and wow, even less odor than the translucent green. In fact, of all the resins so far, this has the least smell. Printed up a Michelangelo sculpture, and it turns out kind of a bone whit and looks like it was purchased at a museum gift shop. I mean, it looks like porcelain! Can't wait to try the clear next, but hope Anycubic brings out more colors!

I have used this resin before and this was no different. I like the low odor and there was no difference between the last bottle and this one when printing. I just finished printing several upgrades for Robot Quest Arena and they came out good.

Advertised arls low odor but smells more than non eco

As a first time owner of a resin printer (Anycubic Photon Mono 4K), I am happy to say it was a painless transition from FDM printing and having a good resin, such as this, helps. I don't have experience with other resins, but this was recommended to me by a coworker who said he uses it for all his stuff he prints, so it's what I went with. I've only done about 3 prints as of writing this review, which I think should be pretty good for figuring out whether or not I will like it, and have to say, I'm completely amazed by the quality. Maybe it's just because all I've known is printing with filament and the difference is night and day.Either way, it prints good, and the printer itself did a good job. The pics I have provided are printed with this resin, but don't represent the true color of the resin since I've applied a light coat of primer since I plan on painting it. The actual color is a shade lighter than the primer.The print quality is still amazing with this resin and clean and cure was a snap with the Anycubic wash and cure station. 10 minute wash, 5 minute cure and print is great.

Toxic? Probably. But the odor is subtly like mushrooms, and you only smell it when the hood is off. If you like mushrooms and don’t want to ruin your love for eating them, then skip out on it. Otherwise it’s good.

I've tried a handful of low-odor resins, trying to find the least "dangerous" one to work with, and I think this may be the closest I've come without breaking the bank. I also just have very sensitive sense of smell so anything that I can use to help reduce the overwhelm of that toxic smell from working with resin is a huge win for me. The prints are still great quality, the sheer strength isn't as good as top-of-the-line resin but it's the best among the non-toxic/low-odor options I've tried, and therefore the value proposition of this resin is solid, in my opinion. I'm now using this 99% of the time and I love it.

I was about to get kicked out of the house due to the smell of typical 3D printing resin. This one is not odorless, but the smell is only a small fraction of the other resins. It also isn't quite so sticky when you get some on a tool handle or your hands (yes, I wear gloves, but I'm not perfect).For the Mars 2 Pro printer I did some tests and found that 3.5 second exposures (45 seconds for the first layers) worked well. Your preferences may vary depending on what you make, but that would be a good starting point. For other printers the numbers could be very different, because each has different UV intensity.I have been printing airfoil cross sections, 113 mm chord by 145 mm wide. The pieces are hollow, with a wall thin enough that it flexes in your fingers. You can seem some flaws in the photo, but most or all are because the FEP film in the machine has damage from previous projects. Once I replace that, results should be excellent. I had a 500 g bottle, and just ordered another 1 kg.