Dirty Pro Tools™ Professional Motorcycle & Mini Tyre Changer Bike Motorbike Go Kart ATV Up to 21"

Perfect tyre changer for the garage but bolted to the floor is a must as it will move when trying to remove the tyre

Been using mine for 17" alloy motorcycle wheels. Had to alter mine slightly I removed the piece of angle iron that hold the wheel in place while breaking the bead it was marking/chipping the paint work on the rim. With the angle stop removed I glued a piece of 10mm rubber to the base so the rim was protected while breaking the bead.Also had to make some slight adjustments to two of the rim clamps so they gripped the rim while the centre shaft was in place I buffed the box section so I could take the clamps down to the next pin holes didn't buff much off just enough so the pin would go in.Use a bungee to hold bead breaker handle up.I don't use the tyre lever that came with it as it would remove the powder coating from the rim use Sealey TC963 Tyre Bar for Aluminium Wheels there is similar levers out there cheaperApart from some small faults I would recommend this tyre changer especially for the price.

The item arrived quickly and as described. The pole in the centre bent really easily.

You get what you pay for. It’s cheaply made and needed modifying to work properly. The tyre bar is useless - it’s way too short and will seriously damage the paintwork on your rims. Must get the alloy wheel bar even for steel rims. At the price, I’d still buy another one over the Sealey version but you will need to adapt it a bit.